Cleaning terrazzo

Terrazzo Cleaning Tips

Request a tile cleaning quuote  buy tile cleaning products

There are two different types of terrazzo: cement-based and resin-based. Both types of terrazzo have a high component of marble, quartz or granite chips or dust providing the colour and life. If your terrazzo is cement-based Slique recommends either sealing or protecting it with a  surface coating (this is particularly popular in commercial environments).

This terrazzo cleaning regime is designed to keep a good-condition surface maintained. It will not remove heavy build-up or stains, or repair terrazzo coatings. However Slique treatments are able to professionally clean the surface, remove isolated or particularly bad stainsremove existing coatings and apply new coatings or sealers.

 

Cleaning terrazzo – regular cleaning

If your terrazzo has had a protective barrier coating applied, you should clean it according to the coating manufacturer’s instructions. The coating isolates the terrazzo so you need to maintain the coating rather than the terrazzo itself.

If your terrazzo has been left natural, or sealed, use the following regular cleaning process:

  1. Vacuum
    Vacuum or wipe the surface to remove loose dust and grit from the surface.
  2. Damp clean
    Clean using a microfibre flat mop or cloth dampened with warm water (no chemicals are necessary when using good-quality microfibre). The mop or cloth will ‘grab’ the surface and lift off most daily grime. Use some pressure to work the microfibre – floating it lightly over the surface will not be so productive!
  3. Spot clean (if necessary)
    Spot clean any spills, marks or stains using a neutral pH chemical such as Slique Cleansing Fluid. After spot cleaning, rinse the surface lightly with clean water.
  4. Dry
    DO NOT leave to dry naturally – dry using an old towel or a clean, dry mop.

 

Cleaning terrazzo - intensive cleaning

  1. Vacuum
    Vacuum or sweep the terrazzo to remove loose grit from the surface.
  2. Scrub
    Scrub a small area (about 3-4 square metres) using a light solution of stone cleaner suitable for terrazzo, such as Slique’s Heavy Duty Tile cleaner. Your local tile shop will have something suitable for home use terrazzo cleaning. Use a soft brush or broom to work the solution into the pores of the tile and grout. Continue to complete small areas until the entire surface has been scrubbed.
  3. Soak
    Leave the solution to work for several minutes, then scrub again.
  4. Extract
    When the solution has lifted out the dirt, remove the liquid and dirt using an old towel or clean, dry mop.
  5. Rinse
    Pour clean water over the surface to rinse.
  6. Dry
    DO NOT leave the surface to dry naturally. Use a clean cloth or mop to soak up any water.
Close

Send to a Friend

Close

Spam Protection