Bathrooms (porcelain or ceramic tiles)

Regular cleaning

Use this for your regular cleaning. Note that use of chemicals is NOT required unless sterilising or spot scrubbing.

  1. Vacuum tiles to remove loose grit from the surface
  2. Clean using a damp microfibre string mop (clean water only – no chemicals).
  3. Spot clean any spills, marks or stains using an alkaline cleaning agent such as Slique Heavy Duty chemical. Make sure dilution instructions are followed carefully.
  4. Rinse lightly with CLEAN water, and dry using an old towel – do not leave to dry on the floor.

 

Periodic cleaning

Use this for periodic cleaning, or when there is a build-up not removed by regular care.

  1. Vacuum tiles to remove loose grit from the surface
  2. Scrub all grout lines and tile surfaces using a light solution of tile cleaner suitable for your tiles, such as Slique Heavy Duty chemical. Use a soft brush to work the solution into the pores of the tiles and grout lines. Leave the solution to work for a time (several minutes) and then agitate again. Complete a manageable area, say 3 or 4 square metres, at a time. If available, the scrubbing process can be completed using either an auto-scrubber and white pad, or a polishing machine and wet vac.
  3. Extract the solution off the floor using a wet vac.
  4. Rinse using clean water. DO NOT leave it to dry on the surface.

 

Need professional help?

This care regime is designed to maintain a good-condition porcelain or ceramic tiled bathroom. If professional restoration is required to get the surface back into as-new condition first, contact Slique for a free consultation.

Close

Send to a Friend

Close

Spam Protection